skip to primary navigationskip to content

Rolls-Royce UTC

Department of Materials Science and Metallurgy

Studying at Cambridge

 

Archive

2014

1. Jones, N.G., Frezza, A., Stone, H.J.; Phase equilibria of an Al0.5CrFeCoNiCu high entropy alloy; (2014) Materials Science and Engineering A, 615, pp. 214-221.

2. Messé, O.M., Barnard, J.S., Pickering, E.J., Midgley, P.A., Rae, C.M.F.; On the precipitation of delta phase in ALLVAC® 718Plus; (2014) Philosophical Magazine, 94 (10), pp. 1132-1152. 

3. Yan, H.-Y., Coakley, J., Vorontsov, V.A., Jones, N.G., Stone, H.J., Dye, D.; Alloying and the micromechanics of Co-Al-W-X quaternary alloys; (2014) Materials Science and Engineering A, 613, pp. 201-208. 

4. Mignanelli, P.M., Jones, N.G., Hardy, M.C., Stone, H.J.; The influence of Al: Nb ratio on the microstructure and mechanical response of quaternary Ni-Cr-Al-Nb alloys; (2014) Materials Science and Engineering A, 612, pp. 179-186.

5. Messé, O.M.D.M., Stekovic, S., Hardy, M., Rae, C.M.F.; Investigation on fatigue crack interaction with grain orientation during TMF tests in Nickel-base superalloy; (2014) Advanced Materials Research, 891-892, pp. 1289-1294.  

6. Jones, N.G., Humphrey, C., Connor, L.D., Wilhelmsson, O., Hultman, L., Stone, H.J., Giuliani, F., Clegg, W.J.; On the relevance of kinking to reversible hysteresis in MAX phases; (2014) Acta Materialia, 69, pp. 149-161.

7. Messé, O.M.D.M., Lachambre, J., King, A., Buffière, J.Y., Rae, C.M.F.; Investigation of fatigue crack propagation in nickel superalloy using diffraction contrast tomography and phase contrast tomography; (2014) Advanced Materials Research, 891-892, pp. 923-928. 

8. Bhowmik, A., Bennett, R.J., Monserrat, B., Conduit, G.J., Connor, L.D., Parker, J.E., Thompson, R.P., Jones, C.N., Stone, H.J.; Alloys based on Cr-Cr2Ta containing Si; (2014) Intermetallics, 48, pp. 62-70.

9. Casanova, A., Hardy, M., Rae, C.M.F.; Morphology and kinetics of grain boundary precipitation in alloy ATI 718Plus®; (2014) 8th International Symposium on Superalloy 718 and Derivatives 2014, pp. 573-586.

10. Bhowmik, A., Knowles, K.M., Stone, H.J.; Discontinuous precipitation of Co 3V in a complex Co-based alloy; (2014) Philosophical Magazine, 94 (8), pp. 752-763.

11. Connor, L.D., Stone, H.J., Collins, D.M., Preuss, M., Hardy, M.C., Rae, C.M.F.; The effect of cooling rate from solution on the lattice misfit during isothermal aging of a Ni-base superalloy; (2014) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 45 (5), pp. 2436-2444.

12. Bhowmik, A., Neumeier, S., Barnard, J.S., Zenk, C.H., Göken, M., Rae, C.M.F., Stone, H.J.; Microstructure and mechanical properties of Cr-Ta-Si Laves phase-based alloys at elevated temperatures; (2014) Philosophical Magazine, 94 (34), pp. 3914-3944.

13. Messé, O.M.D.M., Stekovic, S., Hardy, M.C., Rae, C.M.F.; Characterization of Plastic Deformation Induced by Shot-Peening in a Ni-Base Superalloy; (2014) JOM, 66 (12), pp. 2502-2515. 

14. Collins, D.M., Stone, H.J.; A modelling approach to yield strength optimisation in a nickel-base superalloy; (2014) International Journal of Plasticity, 54, pp. 96-112.

15. Deen, C., Whittaker, M.T., Harrison, W., Rae, C.M.F., Williams, S.J.; Relating fundamental creep mechanisms in Waspaloy to the Wilshire equations; (2014) MATEC Web of Conferences, 14, art. no. 15001.

16. Jones, N.G., Aveson, J.W., Bhowmik, A., Conduit, B.D., Stone, H.J.; On the entropic stabilisation of an Al0.5CrFeCoNiCu high entropy alloy; (2014) Intermetallics, 54, pp. 148-153.

17. Mathur, H.N., Jones, N., Rae, C.M.F.; A study on the effect of composition, and the mechanisms of recrystallisation in single crystal Ni-based superalloys; (2014) MATEC Web of Conferences, 14, art. no. 07003.

18. Zenk, C.H., Neumeier, S., Stone, H.J., Göken, M.; Mechanical properties and lattice misfit of γ/γ' strengthened Co-base superalloys in the Co-W-Al-Ti quaternary system; (2014) Intermetallics, 55, pp. 28-39.

19. Krakow, R., Hardy, M.C., Rae, C.M.F., Midgley, P.A.; High resolution orientation mapping of secondary phases in ATI 718Plus® alloy; (2014) MATEC Web of Conferences, 14, art. no. 11002.

20. Dye, D., Stone, H.J., Watson, M., Rogge, R.B.; Characterization of phase transformations and stresses during the welding of a ferritic mild steel; (2014) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 45 (4), pp. 2038-2045.

21. Panwisawas, C., Mathur, H.N., Broomfield, R.W., Putman, D., Rae, C.M.F., Reed, R.C.; Prediction of recrystallisation in single crystal nickel-based superalloys during investment casting; (2014) MATEC Web of Conferences, 14, art. no. 12002.

22. Mignanelli, P.M., Jones, N.G., Hardy, M.C., Stone, H.J.; The effect of composition on the gamma prime distribution of Ni-Cr-Al-Nb alloys; (2014) 8th International Symposium on Superalloy 718 and Derivatives 2014, pp. 563-572.

23. Aveson, J.W., Reinhart, G., Nguyen-Thi, H., Mangelinck-Noël, N., D'Souza, N., Stone, H.J.; Origins of misorientation defects in single crystal castings: A time resolved in situ synchrotron X-ray radiography study; (2014) MATEC Web of Conferences, 14, art. no. 05003.

  

2013

1. Bensch, M., Konrad, C.H., Fleischmann, E., Rae, C.M.F., Glatzel, U.; Influence of oxidation on near-surface γ' fraction and resulting creep behaviour of single crystal Ni-base superalloy M247LC SX; (2013) Materials Science and Engineering A, 577, pp. 179-188. 

2. Suzuki, A.S., Rae, C.M.F.; Comparison of microstructural evolution in Pt aluminised Ni based superalloys with and without Ru; (2013) Materials Science and Technology (United Kingdom), 29 (6), pp. 726-732.

3. Jones, N.G., Christofidou, K.A., Mignanelli, P.M., Minshull, J.P., Hardy, M.C., Stone, H.J.; Influence of elevated Co and Ti levels on polycrystalline powder processed Ni-base superalloy; (2014) Materials Science and Technology (United Kingdom), 30 (15), pp. 1853-1861.

4. Collins, D.M., Yan, L., Marquis, E.A., Connor, L.D., Ciardiello, J.J., Evans, A.D., Stone, H.J.; Lattice misfit during ageing of a polycrystalline nickel-base superalloy; (2013) Acta Materialia, 61 (20), pp. 7791-7804.

5. Panwisawas, C., Mathur, H., Gebelin, J.-C., Putman, D., Rae, C.M.F., Reed, R.C.; Prediction of recrystallization in investment cast single-crystal superalloys; (2013) Acta Materialia, 61 (1), pp. 51-66. 

6. Choda, V., Bhowmik, A., Edmonds, I.M., Jones, C.N., Stone, H.J.; A study of quaternary Cr-Cr2Ta alloys - Microstructure and mechanical properties; (2013) Materials Research Society Symposium Proceedings, 1516, pp. 275-281.

7. Bhowmik, A., Pang, H.T., Edmonds, I.M., Rae, C.M.F., Stone, H.J.; Effect of silicon additions on the high temperature oxidation behaviour of Cr-Cr 2Ta alloys;(2013) Intermetallics, 32, pp. 373-383.  

8. Aveson, J.W., Tennant, P.A., Foss, B.J., Shollock, B.A., Stone, H.J., D'Souza, N.; On the origin of sliver defects in single crystal investment castings; (2013) Acta Materialia, 61 (14), pp. 5162-5171.

9. Collins, D.M., Conduit, B.D., Stone, H.J., Hardy, M.C., Conduit, G.J., Mitchell, R.J.; Grain growth behaviour during near-γ′ solvus thermal exposures in a polycrystalline nickel-base superalloy; (2013) Acta Materialia, 61 (9), pp. 3378-3391.

10. Bhowmik, A., Stone, H.J.; A study on the influence of Mo, Al and Si additions on the microstructure of annealed dual phase Cr-Ta alloys; (2013) Journal of Materials Science, 48 (8), pp. 3283-3293.

 

2012

1. Panwisawas, C., Mathur, H., Gebelin, J.-C., Putman, D.C., Withey, P., Warnken, N., Rae, C.M.F., Reed, R.C.; Prediction of plastic strain for recrystallisation during investment casting of single crystal superalloys; (2012) Proceedings of the International Symposium on Superalloys, pp. 547-556.

2. Pickering, E.J., Mathur, H., Bhowmik, A., Messé, O.M.D.M., Barnard, J.S., Hardy, M.C., Krakow, R., Loehnert, K., Stone, H.J., Rae, C.M.F.; Grain-boundary precipitation in Allvac 718Plus; (2012) Acta Materialia, 60 (6-7), pp. 2757-2769.  

3. Bensch, M., Fleischmann, E., Konrad, C.H., Fried, M., Rae, C.M.F., Glatzel, U.; Secondary creep of thin-walled specimens affected by oxidation; (2012) Proceedings of the International Symposium on Superalloys, pp. 387-394. 

4. Aveson, J.W., Reinhart, G., Nguyen-Thi, H., Mangelinck-Noël, N., Tandjaoui, A., Billia, B., Goodwin, K., Lafford, T.A., Baruchel, J., Stone, H.J., D'Souza, N.; Dendrite bending during directional solidification; (2012) Proceedings of the International Symposium on Superalloys, pp. 615-624.

5. Vorontsov, V.A., Kovarik, L., Mills, M.J., Rae, C.M.F.; High-resolution electron microscopy of dislocation ribbons in a CMSX-4 superalloy single crystal; (2012) Acta Materialia, 60 (12), pp. 4866-4878. 

6.  Croxall, S.A., Hardy, M.C., Stone, H.J., Midgley, P.A.; The microstructure of RR1000 nickel-base superalloy: The FIB-SEM dual-beam approach; (2012) 1st International Conference on 3D Materials Science 2012, 3DMS 2012, pp. 215-220.

7. Pang, H.T., Edmonds, I.M., Jones, C.N., Stone, H.J., Rae, C.M.F.; Effects of Y and La additions on the processing and properties of a second generation single crystal nickel-base superalloy CMSX-4®; (2012) Proceedings of the International Symposium on Superalloys, pp. 301-310. 

8. Yan, H.-Y., Vorontsov, V.A., Coakley, J., Jones, N.G., Stone, H.J., Dye, D.; Quaternary alloying effects and the prospects for a new generation of Co-base superalloys; (2012) Proceedings of the International Symposium on Superalloys, pp. 705-714.

9. Bhowmik, A., Knowles, K.M., Stone, H.J.; Microstructural evolution and interfacial crystallography in Cr-Cr 2Ta; (2012) Intermetallics, 31, pp. 34-47.

10. Aveson, J.W., Reinhart, G., Billia, B., Nguyen-Thi, H., Mangelinck-Noël, N., Lafford, T.A., Vie, C.A., Baruchel, J., Stone, H.J.; Observation of the initiation and propagation of solidification cracks by means of in situ synchrotron X-ray radiography; (2012) IOP Conference Series: Materials Science and Engineering, 33 (1), art. no. 012040.

11. Bensch, M., Fleischmann, E., Konrad, C.H., Fried, M., Rae, C.M.F., Glatzel, U.; Secondary Creep of Thin-Walled Specimens Affected by Oxidation; (2012) Superalloys 2012, pp. 387-394. 

12. Yan, H.-Y, Vorontsov, V.A., Coakley, J., Jones, N.G., Stone, H.J., Dye, D.; Quaternary Alloying Effects and the Prospects for a New Generation of Co-Base Superalloys; (2012) Superalloys 2012, pp. 705-714.

13. Pang, H.T., Edmonds, I.M., Jones, C.N., Stone, H.J., Rae, C.M.F.; Effects of Y and La Additions on the Processing and Properties of a Second Generation Single Crystal Nickel-Base Superalloy CMSX-4®; (2012) Superalloys 2012, pp. 301-310.

14. Aveson, J.W., Reinhart, G., Nguyen-Thi, H., Mangelinck-Noël, N., Tandjaoui, A., Billia, B., Goodwin, K., Lafford, T.A., Baruchel, J., Stone, H.J., D'Souza, N.;Dendrite Bending during Directional Solidification; (2012) Superalloys 2012, pp. 615-624.

15. Panwisawas, C., Mathur, H., Gebelin, J.-C., Putman, D.C., Withey, P., Warnken, N., Rae, C.M.F., Reed, R.C.; Prediction of Plastic Strain for Recrystallisation during Investment Casting of Single Crystal Superalloys; (2012) Superalloys 2012, pp. 547-556.  

16. Bhowmik, A., Stone, H.J.; Microstructure and mechanical properties of two-phase Cr-Cr2Ta alloys; (2012) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 43 (9), pp. 3283-3292.

17. Pang, H.T., Stone, H.J., Rae, C.M.F., Zhang, L., Hobbs, R.A.; Solution heat treatment optimization of fourth-generation single-crystal nickel-base superalloys; (2012) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 43 (9), pp. 3264-3282. 

18. Bhowmik, A., Jones, C.N., Edmonds, I.M., Stone, H.J.; Effect of Mo, Al and Si on the microstructure and mechanical properties of Cr-Cr 2Ta based alloys; (2012) Journal of Alloys and Compounds, 530, pp. 169-177.

19. Vorontsov, V.A., Voskoboinikov, R.E., Rae, C.M.F.; Shearing of γ′ precipitates in Ni-base superalloys: A phase field study incorporating the effective γ-surface; (2012) Philosophical Magazine, 92 (5), pp. 608-634.  

 

2011

1. Bhowmik, A., Pang, H.T., Neumeier, S., Stone, H.J., Edmonds, I.; Microstructure and oxidation resistance of Cr-Ta-Si alloys; (2011) Materials Research Society Symposium Proceedings, 1295, pp. 323-328.

2. Ang, J., Vorontsov, V.A., Hayward, C.L., Balakrishnan, G., Stone', H.J., Rae, C.M.F.; Quarternary and quinary additions to directionally-solidified X-X 3Si eutectics of chromium and vanadium; (2011) Materials Research Society Symposium Proceedings, 1295, pp. 391-396. 

3. Minshull, J.P., Neumeier, S., Tucker, M.G., Stone, H.J.; A1-L12 structures in the Al-Co-Ni-Ti quaternary phase system; (2011) Advanced Materials Research, 278, pp. 399-404.

4. Vorontsov, V.A., Voskoboinikov, R.E., Rae, C.M.F.; Prediction of mechanical behaviour in Ni-base superalloys using the phase field model of dislocations (2011) Advanced Materials Research, 278, pp. 150-155. 

5. Collins, D.M., Heenan, R.K., Stone, H.J.; Characterization of gamma prime (γ) precipitates in a polycrystalline nickel-base superalloy using small-angle neutron scattering; (2011) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 42 (1), pp. 49-59.

6. Suzuki, A.S., Rae, C.M.F., Hobbs, R.A., Murakami, H.; Secondary reaction zone formations in pt-aluminised fourth generation ni-base single crystal superalloys; (2011) Advanced Materials Research, 278, pp. 78-83. 

7. Pang, H.T., Hobbs, R.A., Stone, H.J., Rae, C.M.F.; A study of the effects of alloying additions on TCP phase formation in 4th generation nickel-base single-crystal super alloys; (2011) Advanced Materials Research, 278, pp. 54-59.

8. Neumeier, S., Ang, J., Hobbs, R.A., Rae, C.M.F., Stone, H.J.; Lattice misfit of high refractory ruthenium containing nickel-base superalloys; (2011) Advanced Materials Research, 278, pp. 60-65.  

 

2010

1. Vorontsov, V.A., Rae, C.M.F., Shen, C., Wang, Y., Dye, D.; Shearing of γ́ precipitates by a(112) dislocation ribbons in Ni-base superalloys: A phase field approach; (2010) Acta Materialia, 58 (12), pp. 4110-4119. 

 

2009

1. Voskoboinikov, R.E., Rae, C.M.F.; A new γ-surface in {111} plane in L12 Ni3Al; (2009) IOP Conference Series: Materials Science and Engineering, 3, art. no. 012009. 

2. Suzuki, A., Rae, C.M.F.; Secondary reaction zone formations in coated Ni-base single crystal superalloys; (2009) Journal of Physics: Conference Series, 165, art. no. 012002.

3. Pang, H.T., Dong, H.B., Beanland, R., Stone, H.J., Rae, C.M.F., Midgley, P.A., Brewster, G., D'Souza, N.; Microstructure and solidification sequence of the interdendritic region in a third generation single-crystal nickel-base superalloy;(2009) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 40 (7), pp. 1660-1669. 

4. Rae, C.M.F., Zhang, L.; Primary creep in single crystal superalloys: Some comments on effects of composition and microstructure; (2009) Materials Science and Technology, 25 (2), pp. 228-235. 

5. Reed, R.C., Wu, R.T., Hook, M.S., Rae, C.M.F., Wing, R.G.; On oxidation behaviour of platinum aluminide coated nickel based superalloy CMSX-4; (2009) Materials Science and Technology, 25 (2), pp. 276-286.  

6. Tsuno, N., Kakehi, K., Rae, C.M.F., Hashizume, R.; Effect of ruthenium on creep strength of Ni-Base single-crystal superalloys at 750 °C and 750 MPa; (2009) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 40 (2), pp. 269-272.

7. Dye, D., Coakley, J., Vorontsov, V.A., Stone, H.J., Rogge, R.B.; Elastic moduli and load partitioning in a single-crystal nickel superalloy; (2009) Scripta Materialia, 61 (2), pp. 109-112.

 

2008

1. Tsuno, N., Shimabayashi, S., Kakehi, K., Rae, C.M.F., Reed, R.C.; Tension/compression asymmetry in yield and creep strengths of Ni-based superalloys; (2008) Proceedings of the International Symposium on Superalloys, pp. 433-442. 

2. Stapleton, A.M., Raghunathan, S.L., Bantounas, I., Stone, H.J., Lindley, T.C., Dye, D.; Evolution of lattice strain in Ti-6Al-4V during tensile loading at room temperature; (2008) Acta Materialia, 56 (20), pp. 6186-6196.

3. Hobbs, R.A., Brewster, G.J., Rae, C.M.F., Tin, S.; Evaluation of ruthenium-bearing single crystal superalloys - A design of experiments; (2008) Proceedings of the International Symposium on Superalloys, pp. 171-180. 

4. Suzuki, A., Rae, C.M.F., Yoshida, M., Matsubara, Y., Murakami, H.; Secondary reaction zones in coated 4th generation Ni-based blade alloys; (2008) Proceedings of the International Symposium on Superalloys, pp. 777-786.

5. Tin, S., Zhang, L., Hobbs, R.A., Yeh, A.-C., Rae, C.M.F., Broomfield, B.; Linking the properties, processing and chemistry of advanced single crystal Ni-base superalloys; (2008) Proceedings of the International Symposium on Superalloys, pp. 81-90.

6. Hobbs, R.A., Zhang, L., Rae, C.M.F., Tin, S.; The effect of ruthenium on the intermediate to high temperature creep response of high refractory content single crystal nickel-base superalloys; (2008) Materials Science and Engineering A, 489 (1-2), pp. 65-76.

7. Hobbs, R.A., Zhang, L., Rae, C.M.F., Tin, S.; TCP suppression in a ruthenium-bearing single-crsytal nickel-based superalloy; (2008) JOM, 60 (7), pp. 37-42.

8. Hobbs, R.A., Zhang, L., Rae, C.M.F., Tin, S.; Mechanisms of topologically close-packed phase suppression in an experimental ruthenium-bearing single-crystal nickel-base superalloy at 1100 °C; (2008) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 39 A (5), pp. 1014-1025.

9. Pahlavanyali, S., Drew, G., Rayment, A., Rae, C.M.F.; Thermo-mechanical fatigue of a polycrystalline superalloy: The effect of phase angle on TMF life and failure; (2008) International Journal of Fatigue, 30 (2), pp. 330-338. 

10. Pahlavanyali, S., Rayment, A., Roebuck, B., Drew, G., Rae, C.M.F.; Thermo-mechanical fatigue testing of superalloys using miniature specimens; (2008) International Journal of Fatigue, 30 (2), pp. 397-403. 

 

2007

1. Pahlavanyali, S., Drew, G., Rayment, A., Rae, C.M.F.; Oxidation assisted thermomechanical fatigue failure of polycrystalline superalloys; (2007) Materials Science and Technology, 23 (12), pp. 1454-1460. 

2. Charles, C.M., Drew, G.A., Bagnall, S., Rae, C.M.F.; Dislocation deformation mechanisms during fatigue of the nickel-based superalloy CMSX-4; (2007) Materials Science Forum, 546-549 (PART 3), pp. 1211-1218.  

3. Suzuki, A., Wu, Y., Yamaguchi, A., Murakami, H., Rae, C.M.F.; Oxidation behavior of Pt-Ir modified aluminized coatings on Ni-base single crystal superalloy TMS-82+; (2007) Oxidation of Metals, 68 (1-2), pp. 53-64. 

4. Reed, R.C., Cox, D.C., Rae, C.M.F.; Kinetics of rafting in a single crystal superalloy: Effects of residual microsegregation; (2007) Materials Science and Technology, 23 (8), pp. 893-902. 

5. Hobbs, R.A., Karunaratne, M.S.A., Tin, S., Reed, R.C., Rae, C.M.F.; Uphill diffusion in ternary Ni-Re-Ru alloys at 1000 and 1100 °C; (2007) Materials Science and Engineering A, 460-461, pp. 587-594. 

6.  Rae, C.M.F., Reed, R.C.; Primary creep in single crystal superalloys: Origins, mechanisms and effects; (2007) Acta Materialia, 55 (3), pp. 1067-1081. 

7. Reed, R.C., Cox, D.C., Rae, C.M.F.; Damage accumulation during creep deformation of a single crystal superalloy at 1150 °C; (2007) Materials Science and Engineering A, 448 (1-2), pp. 88-96. 

 

2005

1. Hobbs, R.A., Tin, S., Rae, C.M.F.; A castability model based on elemental solid-liquid partitioning in advanced nickel-base single-crystal superalloys; (2005) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 36 (10), pp. 2761-2773. 

2. Rae, C.M.F., Hook, M.S., Reed, R.C.; The effect of TCP morphology on the development of aluminide coated superalloys; (2005) Materials Science and Engineering A, 396 (1-2), pp. 231-239.  

3. Mitchell, R.J., Rae, C.M.F., Tin, S.; Grain boundary transformations during isothermal exposure of powder metallurgy nickel base superalloys for turbine disc applications; (2005) Materials Science and Technology, 21 (1), pp. 125-132. 

 

2004

1. Hobbs, R.A., Tin, S., Rae, C.M.F., Broomfield, R.W., Humphreys, C.J.; Solidification characteristics of advanced nickel-base single crystal superalloys; (2004) Proceedings of the International Symposium on Superalloys, pp. 819-825.

2. Drew, G.L., Reed, R.C., Kakehi, K., Rae, C.M.F.; Single crystal superalloys: The transition from primary to secondary creep; (2004) Proceedings of the International Symposium on Superalloys, pp. 127-136. 

3. Yeh, A.C., Rae, C.M.F., Tin, S.; High temperature creep of Ru-bearing Ni-base single crystal superalloys; (2004) Proceedings of the International Symposium on Superalloys, pp. 677-685. 

 

2003

1. Cox, D.C., Roebuck, B., Rae, C.M.F., Reed, R.C.; Recrystallisation of single crystal superalloy CMSX-4; (2003) Materials Science and Technology, 19 (4), pp. 440-446. 

 

2002

1. Hook, M.S., Rae, C.M.F., Reed, R.C.; On the compatibility of superalloy substrate composition with the application of low temperature high activity pack-cementation aluminide coatings; (2002) Advanced Materials and Processes for Gas Turbines, pp. 179-186. 

 

2001

1. Karunaratne, M.S.A., Rae, C.M.F., Reed, R.C.; On the microstructural instability of an experimental nickel-based single-crystal superalloy; (2001) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 32 (10), pp. 2409-2421. 

2. Dye, D., Stone, H.J., Reed, R.C.; Intergranular and interphase microstresses; (2001) Current Opinion in Solid State and Materials Science, 5 (1), pp. 31-37.

3. Dye, D., Stone, H.J., Reed, R.C.; A two phase elastic-plastic self-consistent model for the accumulation of microstrains in Waspaloy; (2001) Acta Materialia, 49 (7), pp. 1271-1283.

4.  Rae, C.M.F., Reed, R.C.; The precipitation of topologically close-packed phases in rhenium-containing superalloys; (2001) Acta Materialia, 49 (19), pp. 4113-4125. 

5. Rae, C.M.F., Matan, N., Reed, R.C.; The role of stacking fault shear in the primary creep of [001]-oriented single crystal superalloys at 750°C and 750 MPa; (2001) Materials Science and Engineering A, 300 (1-2), pp. 125-134. 

 

2000

1. Rae, C.M.F., Matan, N., Cox, D.C., Rist, M.A., Reed, R.C.; On the primary creep of CMSX-4 superalloy single crystals; (2000) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 31 (9), pp. 2219-2228.

2. Stone, H.J., Roberts, S.M., Reed, R.C.; A process model for the distortion induced by the electronbeam welding of a nickel-based superalloy; (2000) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 31 (9), pp. 2261-2273.

 

1999

1.  Reed, R.C., Matan, N., Cox, D.C., Rist, M.A., Rae, C.M.F.; Creep of CMSX-4 superalloy single crystals: effects of rafting at high temperature; (1999) Acta Materialia, 47 (12), pp. 3367-3381. 

2. Matan, N., Cox, D.C., Rae, C.M.F., Reed, R.C.; On the kinetics of rafting in CMSX-4 superalloy single crystals; (1999) Acta Materialia, 47 (7), pp. 2031-2045.

3. Stone, H.J., Holden, T.M., Reed, R.C.; Determination of the plane specific elastic constants of Waspaloy using neutron diffraction; (1999) Scripta Materialia, 40 (3), pp. 353-358.

4. Stone, H.J., Holden, T.M., Reed, R.C.; On the generation of microstrains during the plastic deformation of Waspaloy; (1999) Acta Materialia, 47 (17), pp. 4435-4448.

5. Stone, H.J., Withers, P.J., Holden, T.M., Roberts, S.M., Reed, R.C.; Comparison of three different techniques for measuring the residual stresses in an electron beam-welded plate of WASPALOY; (1999) Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 30 (7), pp. 1797-1808.

6. Matan, N., Cox, D.C., Carter, P., Rist, M.A., Rae, C.M.F., Reed, R.C.; Creep of CMSX-4 superalloy single crystals: Effects of misorientation and temperature; (1999) Acta Materialia, 47 (5), pp. 1549-1563.

 

1998

Stone, H.J., Roberts, S.M., Withers, P.J., Reed, R.C., Holden, T.M.; The Development and Validation of a Model for the Electron Beam Welding of Aero-Engine Components; (1998) ASM Proceedings of the International Conference: Trends in Welding Research, pp. 955-960.

 

1997

Reed, R.C., Stone, H.J., Roberts, S.M., Robinson, J.M.; The development and validation of a model for the electron beam welding of aero-engine components; (1997) Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 211 (6), pp. 421-428. 

RSS Feed Latest news

Dr. Lewis Owen appointed to a Junior Research Fellowship at Gonville & Caius College Cambridge

Jan 24, 2018

Dr. Lewis Owen has been appointed to a Junior Research Fellowship commencing in October 2018 at Gonville & Caius College Cambridge. We look forward to many more years of high quality research into the wonderful world of short range order.

Cambridge Academy for Science and Technology Visit

Jan 17, 2018

We had a fantastic time today hosting the uber-talented students from the Cambridge Academy for Science and Technology. We believe sharing some of our research and encouraging as many people as possible to consider STEM careers is a key responsibility for any scientist/engineer.

PhD studentships now available within the group

Jan 09, 2018

Navigate onto our vacancies page to find out more!

Strategic Partnership with Rolls-Royce shortlisted for a Times Higher Education Award 2017

Oct 03, 2017

The Rolls-Royce partnership with the universities of Cambridge, Swansea and Birmingham has been shortlisted for a Times Higher Education Award 2017. Find out more here: https://www.timeshighereducation.com/news/times-higher-education-awards-2017-shortlist-announced

New high temperature thermocouple

Nov 14, 2016

Dr. Michele Scervini has developed a new thermocouple for high-temperature applications